Wood turning has become a part of the classic and wooden boat fest. A lot of products were made out of wood and processed under woodturning such as platters.
Do it yourself Archives
Using the jig that was cut in the part I of the demo, it will be placed on the box where it will serve as support.
The primary reason of using a zero tolerance throat plate is that there is no gap in both sides of the blade which keeps small pieces to get stuck in the table saw when pulling your hand towards the blade.
A spline is a strong and decorative joint used to strengthen a narrow miter. You can make your own spline miter joint since it is not so difficult to do.
Most people would want to raise chicken especially with a big space at their own backyard. However, people in the neighbouring houses often find this troublesome as chickens would always want to roam around the ground freely.
The builder introduces a project commissioned by a client, who wants his media cabinet painted rather than stained. The host explains that the fact that the cabinet will be painted introduces an “I can do that!” factor to the project, making it appropriate for intermediate woodworkers who are still developing their skills.
This video illustrates the casework assembly for the media cabinet. The builder states that the process is a matter of artfully combining screws, glue and brad nails.
With the casework finished, this video highlights the preparation and installation of the main face frame.
Barry O’Brien produced this video for BobVila.com as a guide for a homeowner wanting to install his own wood floor.
The makers of this video are laying a floor of wide planks that have foam cushioning on the back and an adhesive along the tongue and groove sides.